Most jigsaw puzzle enthusiasts like to preserve jigsaws, particularly if they contain a thousand pieces or more, as it's a tribute to their patience and labor. Preserving a jigsaw by mounting, laminating, and framing would enable others to understand one's pastime while serving as a nice decorative piece on the wall.

After patiently putting the jigsaw puzzle collectively, one should gingerly place a thin piece of plastic between the underside of the jigsaw puzzle and the surface that one is working on. This is to stop the counter or table from getting residual glue, which often seeps by means of, on it.

One ought to then evenly apply glue to the higher (image) surface of the jigsaw. One might use soft wood sticks to compress the puzzle while gluing and await an hour or for it to dry. One might then apply a second coat of glue. Multiple light coats, as opposed to a thick coating, prevent items of the image from bloating or swelling up. One could use a sponge for application or use the applicator provided.

Some thicker glue would do for bigger piece puzzles whereas, a more liquid glue could be higher for tight fitting puzzles. A shinier finish could possibly be used for irregular shapes that can not be laminated or for photos too big to be framed.

As soon as the jigsaw is totally dried it can be turned over. It might then be glued on the back to mount on a plywood board reduce to size. One might laminate if desired or spray the top surface with an acrylic spray to safeguard from mud and other contaminants. One might also mount it on to a sheet of Styrofoam with rubber cement and then fit into a wooden frame.

One's jigsaw is now ready to be displayed or to be given as a gift to a beloved one.

If you have any concerns about the place and how to use puzzle table, you can get hold of us at our website.